Impulse Sealers

This sealer suits for various plastic films, package, which applies to foodstuff, candy, medicine, local specialty, electric elements. Etc. It is inexpensive and beneficial sealer used in factories, shops and service industries.

PFS-200 8” Portable Hand Operated Impulse Heat Sealer

* Power: 300W
* Maximum seal length: 200mm
* Maximum seal thickness: 0.3mm
* Sealing width: 2mm
* Dimensions: 15 x 32 x 15cm
* Weight: 2.7kg

PFS-300 12” Portable Hand Operated Impulse Heat Sealer

* Power: 400W
* Maximum seal length: 300mm
* Maximum seal thickness: 0.4mm
* Sealing width: 3mm
* Dimensions: 8.2 x 45 x 18cm
* Weight: 4.5kg


OPERATION

* Plug in the sealer.
* Adjust the timer knob properly for the material you are sealing.
* Place the bag you want to seal on the heating element.
* Close the sealing arm using the operation handle.
* Hold arm in place until sealing light extinguishes.
* Open arm. Seal Complete.


TROUBLESHOOTING

* The seal is damaged; you used to much heat for the type of bag you are sealing. Reduce the heat exposure time with the adjustable heat time knob.
* Your seal comes apart; you did not use enough heat for the type of bag you are sealing. Increase the heat exposure time with the adjustable heat time knob.


KEEP YOUR HEAT SEALER WORKING PROPERLY

* Always keep the heating platform clean. Leaving residue will reduce the life of the element, Teflon, and silicon rubber.
* Never use moisture to clean the sealing surface.
* Replace torn Teflon at once. A torn cloth will short circuit the element and damage it. Every time you replace the element, replace the lower and upper cloth.
* Unplug the machine when servicing.

Note: This is NOT the cheap plastic model but the durable cast metal version.  Please beware the ones selling outside!

RM, please email to enquire.

Email us to purchase:
onlinescalestore@gmail.com